next up previous contents
Next: List of Tables Up: Manual for the Robotically Previous: Contents   Contents


List of Figures

  1. The Project selection page
  2. View Projects - New Project information page
  3. Rachel's list of Existing Projects
  4. Request Home - options for creating/managing objects & requests, analyzing the content of the queue and other Management Facilities
  5. The Add Object Request Page
  6. Manage Objects - Add Celestial Objects to Library page
  7. The moving object request Page
  8. The main Manage Objects page with 1 target listed
  9. Request Manager main page listing all objects for which observations have been assigned.
  10. Request Manager - Create Request Page. These are the options you can specify to determine when your observation will be scheduled. Any parameter left blank will be a free parameter when the observations are inserted into the observing queue.
  11. Request Manager - home page now with 81P/Wild in the list of requested objects.
  12. Request Manager - Add Target Page. Here you can select from the objects created previously and specify the count which is the number of nights you want the observation repeated.
  13. Request Manager - home page now with both lines of information visible, that for the request and for the target data.
  14. Request Manager - Create Picture page where you enter your desired exposure time, filter etc
  15. Request Manager - home page with a completed request, ie including target and picture information
  16. The Telescope
  17. The Camera mounted on the telescope
  18. CCD Quantum Efficiency
  19. CCD Dewar Window Transmission
  20. Location of the amplifiers and the cardinal directions
  21. Location of the image pixel readout on the entire CCD
  22. Location of the image pixel readout on C amplifier
  23. The CCD Cooling System
  24. Voltage Test Point Schematic
  25. Cloud Sensor Calibration
  26. Photo of Cloud Sensor
  27. A view of the Encoder and Limit Switches.
  28. A view of the Dome Azimuth encoder
  29. A view of the two Dome drive motors.
  30. A view of the Power Supply system for the Dome
  31. The Dome Slit motor
  32. The Dome Slit control panel
  33. Photo of the Upper filter wheel
  34. Photo of the Finder
  35. Photo of the Focus
  36. Photo of the GWSlights mounted on a ring around the focus.
  37. Photo of the Great White Spot (GWS)
  38. Guide Vignetting Map
  39. Photo of the Hour Angle Drive
  40. Photo of the Interlock Safe Mode button near downstairs entrance door
  41. Photo of the actuators on the Mirror Cover
  42. Photo of the downstairs compressor supporting the Mirror.
  43. Photo of the Mirror compressor valves mounted at the base of the telescope
  44. Photo of the Manual Override Panel (MOP) in the Control Room.
  45. Photo of the APC Power strip at the bottom of the rack in the control room.
  46. Temperature sensor data taken over 1 month
  47. Photo of all the hockey pucks on the East side of the telescope.
  48. Photo of Temperature Sensor A on the lower truss at the North.
  49. Photo showing how to rescue the telescope from a tilt limit strike.
  50. Photo of the UPS box
  51. Photo of the Weathermast.
  52. Photo of a Webcam mounted in the Dome.
  53. A montage of twenty typical focus images as produced by focusdip.
  54. The parabolic fit to a set of focus values as found by focanl
  55. A schematic of the relationship between tx, tserver and the various servers.
  56. Dewar with attached Vacuum Pump
  57. Camera Dewar and Electronics Box
  58. Cleaning the Dewar Window


Louis-Gregory Strolger 2012-01-09